Conlux MEI CV1012 Bill Validator Acceptor (Refurbished)


Price:
Sale price$289.00

Description

Conlux CV1012 Bill Validator — MDB Upstacker

Conlux CV1012 bill validator from the CV1000 series. MDB note acceptor for commercial vending. Bottler / VFM-style bezel with setback. 4-way acceptance of U.S. bills and an upstack cash box.

What it does: Reads and stacks paper money, then sends credit to the vender over MDB. Optical validation with dual pellet sensing. One-note escrow. Program denominations with the blue button on the back or a configuration coupon — no handheld required for basic setup.

Typical specs:

  • Model family: Conlux CV1000
  • Common part numbers: 46603 (CV1012-U3M) and 46604 (CV1012-U5M)
  • Accepts U.S. $1, $2, $5, $10, $20 (enable/disable by programming)
  • 4-way insertion (face up or down, either end first)
  • Acceptance: about 95%+ under normal conditions
  • Interface: MDB only
  • Power: 22–45 VDC (about 34 VDC / 2 A in MDB)
  • Stacker: 300 or 500 note upstack magazine
  • Bezel: VFM / bottler style with setback and lighted arrows
  • Operating temp: -15°C to 60°C
  • Weight: about 5 lb / 1.6 kg

Fits / used on: MDB drink and snack machines with a standard bill-validator opening and bottler-style mask (Dixie Narco, Vendo, Royal, Crane, and similar). Pair with an MDB coin changer such as a Conlux MCM5 or CPI Gryphon. CV1022 is the compact / full-line mask version — do not assume the bezels swap without checking setback.

Common reason to replace: Bills rejected or pulled back; stacker jam; no credit; status LED flashing “disabled” or “MDB comms”; worn belts or sensors; updating an older $1-only unit to $1–$20.

Install notes:

  • Confirm the machine is MDB and supplies validator voltage. This is not a 110V validator.
  • Mount on the OEM studs, plug the MDB harness (Y-cable if a coin mech is on the same bus).
  • Status LED on = enabled and ready. Use the flash chart for jams, full stacker, or disabled-by-VMC.
  • To set bills: press the blue button, feed each denomination you want accepted, then exit.
  • Keep the note path clean. A full stacker or empty coin tubes will disable acceptance.

Solid MDB bill box for operators keeping a Conlux payment stack on a drink machine. Match bezel style and voltage before ordering.

Click here to download the programming coupon for this validator

Estimate shipping

You may also like

Recently viewed